ST

ST

Silicone Tubing

  • Heat resistant up to 315°C
  • Material: Silicone
  • When sizing parts as a sleeve, the ID of the ST Tubing should be approximately equal to the stud diameter
  • To ensure easy removal, cut the tube length at least 1/2” longer than masking length of the stud. This is especially important if the tube ID is smaller than the stud diameter by more than 2%
  • When sizing parts as a plug, the OD should be 3-7% larger than thehole diameter
  • Due to the low tear resistance of silicone, do not use pliers or other sharp tools for removal
  • Can be used in conjunction with a standard cap to create a long, non-hollow cap

 

Part Number fits for ID (mm) OD (mm) ID (in) OD (in) Meter P/R Bag Qty / Roll
ST0109 - 2.80 5.90 0.11 0.23 30.00 1
ST0125 - 3.20 6.40 0.13 0.25 30.00 1
ST0140 M4 3.60 6.70 0.14 0.27 30.00 1
ST0156 - 4.00 7.10 0.16 0.28 30.00 1
ST0187 M5 4.70 7.90 0.19 0.31 30.00 1
ST0203 - 5.20 8.30 0.20 0.33 30.00 1
ST0218 M6 5.50 8.70 0.22 0.34 30.00 1
ST0234 - 5.90 9.10 0.23 0.36 30.00 1
ST0250 - 6.40 9.50 0.25 0.38 30.00 1
ST0281 M8 7.10 10.30 0.28 0.41 15.00 1
ST0312 - 7.90 11.10 0.31 0.44 15.00 1
ST0343 - 8.70 11.90 0.34 0.47 15.00 1
ST0375 M10 9.50 12.70 0.38 0.50 15.00 1
ST0406 - 10.30 13.50 0.41 0.53 15.00 1
ST0437 M12 11.10 14.30 0.44 0.56 15.00 1
ST0500 - 12.70 15.90 0.50 0.63 15.00 1
ST0625 - 15.90 19.10 0.63 0.75 15.00 1
ST0750 M20 19.10 22.20 0.75 0.88 15.00 1